You must have seen on sites like Pinterest and Google where the creative lighting ideas and their pictures are being shared. Let us not deny that it looks tempting and you may even want to create on own. But often, people like us simply turn the page considering it is a time taking process. But it is good news! You don’t have to spend dollars to buy a lamp when you can make it at home. With just a few things that are needed and some crafty ideas, you will be all set to make the creative lamp without even wasting your time. Wondering how? Let us explore this post now.
Finding the light with a perfect Lamp
With different lighting options available in the market, you can boost your creativity for creating the lamp on your own. Be it the chandeliers, pendants, or even the lamps collection, the one that suits your needs can be quite tricky to be found in the market. But you can design it on your own. This can be a memorable DIY project which you can plan with your family and friends. This can be fun and surely it is one of the most creative options you can learn.
Easy learning steps
When you can’t find a lamp of your taste. You can create one. But for this, you need to think of the theme. May be from old books to be made or using a bottle or old bobbin you want to create a lamp. The choice is entirely yours. Here is the easiest trick you can try out.
Also Read: Learn These Easy Ways To Make Table On Your Own
Tools and materials needed:
- A 3/8-inch bit of drill
- Wooden button caps-2(to be used for the base of the lamp)
- Threaded lamp rod
- Lamp kit (This includes lamp cord, harp, and socket)
- Screwdriver
- Utility knife or wire strippers
- Decorative Object That You Want To Make The Lamp From
- Wooden Block
- Wood Glue
- Nut
- Bolt
- Hacksaw
- File
- Lampshade
Also Read: Best Tips For Using Indoor Plants In Interior Decoration
Step 1
Gear up all your tools and materials to start creating the lamp that can enhance the look of the home.
You need to start by drilling a hole in the center of the base that you are planning to use. It is important to mount the product on the wooden block. This would give you a strong base. In case you need a hole, then at least a woodblock can be used for trial initially.
Step 2
You must paint the wooden caps. See to it that it matches the base. You can stick the button caps at the base bottom. This would increase the base and let the lamp corer go under it.
Step 3
Get the hacksaw and use it for cutting the rod for the lamp. It must be taken in the desired length and then fill the rough edges if there are any.
Step 4
You then must thread the rod from the decorative object’s bottom with a wooden base. You can use a nut and washer to secure the rood from the base underside.
Step 5
For an easy way to threaten through the rod, you can out the masking tape around the cord. The lamp cord needs to be then threaded from the base bottom approximately toll 5 inches of the cord that will tick out of the rod top.
Step 6
You are almost halfway there. You then must do the threading of the socket components in the lamp cord. This must be done in a systematic manner which should include the neck, harp, lock nut, and even the socket cap. Make sure the socket cap is screw dip securely to the rod. This way they hold will stay stronger.
Step 7
It is now time to take a measurement of 2 inches to pull the cord and lamp wide apart. For this, you can use the wire stripper or the utility knife for stripping the ½-inch of insulation from every wire.
Step 8
In order to make sure the wires are not pulled back from the lamp rod, you can then fit it to the underwriter’s knot. For this, you will have to create a loop with the wire’s end. Then hold one loop end at the joined cord front and then the other loop from behind the joined cord. The passing needs to be done through the very end of the loop using the opposite wire. The knot then needs to be tightened and secured.
Step 9
It is time to attach the wire with the socket. For this, see to it not even a single dyed end is left. You can twist the strands in the clockwise position of the wire expressed. The neutral wire can be ribbed and connected to the terminal of silver color. Connect the bass terminal and hot wire and the bend it well around the screw in a similar direction so that the screw will get toughened up.
Step 10
You are almost there. You simply must fit the wires in the downward site and first the cap of the socket in the place. Once the click sound of the socket cap is noticed, you will understand that connection is secured.
Also Read: How To Convert Your Balcony Into A Small…
You can then put the lampshade and add the harp too.
Creating objects like a lamp will surely give you a satisfying feeling as you made it from your own hands especially when you make it with the materials that need to be recycled. The steps mentioned above are surely the best and easy methods to come with a creative side of yours. For crafty items like lamps, you can brighten your day. These kinds of projects are fun to do besides, the popularity of it can be seen from the huge interest of people who often visit the DIY tips for creating the lamps. Further, given below are some video tutelars for reference that you can choose.
This weekend, it is time to get in some fun activity and nothing can be better than creating lamps for the room and enhance the atheistic style in your own crafty way that must have imagined.
You can do video tutorials at: